BHGQG - V-114L (X-20132)
- MSDS: BHGQG
- Manufacturer: STABOND CORP
- Product Name: V-114L (X-20132)
- National Stock Number: 8030-00-118-2463
Product Identification
Product ID:V-114L (X-20132)
MSDS Date:06/23/1993
FSC:8030
NIIN:00-118-2463
MSDS Number: BHGQG
Responsible Party
GARDENA, CA 90249-3008
US
Emergency Phone: 213-770-0591
Info Phone: 213-770-0591
Preparer: D MARTINSON
Cage: 25670
Contractor
Telephone: 213-770-0591/800-4249300
Cage: 25670
Ingredients
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 80%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
COATING & MATERIAL 5.62 LBS/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO NOSE, THROAT
& MUCOUS MEMBRANES. SKIN: SEVERE IRRITATION & DERMATITIS. EYES:
IRRITATION & BURNING SENSATION. INGESTION: IF SMALL AMOUNTS
ASPIRATE INTO THE LUNGS, BRONCHIOPNEU MONIA/PULMONARY EDEMA CAN
OCCUR.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHES, DIZZINESS, DROWSINESS,
UNCOORDINATION, NAUSEA, UNCONSCIOUS, BURNS, DRYNESS, VOMITING,
DIARRHEA, UPSET STOMACH, DEFATTING, BURNING SENSATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING, IF
REQUIRED. KEEP WARM. EYE: WASH W/LARGE AMOUNTS OF WATER. INGESTION:
DON'T INDUCE VOMITING. IF VOMITING OCCURS SPONTANEOUSLY, KEEP
VICTIMS HEAD BE LOW HIPS TO PREVENT BREATHING VOMITUS INTO LUNGS.
OBTAIN MEDICAL ATTENTION IN ALL CASES. (SEE SUPP)
Fire Fighting
Flash Point Method:TCC
Flash Point:20F
Lower Limits:1.4
Upper Limits:11.4
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA FOR FIRES IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:VOLATILE SOLVENT CONSTITUENT CAN READILY
FORM EXPLOSIVE/FLAMMABLE MIXTURES IN AIR. VAPORS CAN FLOW ALONG
SURFACES TO DISTANT IGNITION SOURCES/FLASH BACK.
Accidental Release
Spill Release Procedures:HANDLE AS A FLAMMABLE LIQUID. REMOVE IGNITION
SOURCES. SOAK UP WET MATERIAL ON A NON-COMBUSTIBLE ABSORBENT &
PLACE IN A CLOSED METAL CONTAINER.
Handling
Handling and Storage Precautions:STORE IN COOL, WELL VENTILATED AREAS
AWAY FROM ANY IGNITION SOURCES & STRONG OXIDIZING AGENTS. KEEP
CONTAINERS TIGHTLY CLOSED, WHEN NOT IN USE.
Other Precautions:DON'T TRANSFER TO PLASTIC CONTAINERS. GROUND/BOND
METAL CONTAINERS WHEN DISPENSING. NO SMOKING IN AREAS OF
USE/STORAGE. USE ONLY NON-SPARKING TOOLS NEAR WET ADHESIVE/SOLVENT
VAPORS. DON'T USE CONTACT LENSES.(SEE SUPP)
Exposure Controls
Respiratory Protection:MATERIAL NOT SUITED FOR SPRAY. IN
RESTRICTED/NON-VENTILATED AREAS WHERE VAPOR EXPOSURE MAY BE
ENCOUNTERED, USE RESPIRATOR W/ORGANIC SOLVENT VAPOR ABSORBING
FILTER/INDEPENDENT AIR SUPPLY.
Ventilation:MECHANICAL/LOCAL EXHAUST TO MEET TLV REQUIREMENTS & PREVENT
EXPLOSIVE CONCENTRATIONS OF SOLVENT VAPORS.
Protective Gloves:POLYETHYLENE/NATURAL RUBBER
Eye Protection:RECOMMENDED
Other Protective Equipment:SAFETY GLASSES W/SPLASH GUARDS/SIDE SHIELDS.
EYE WASH FOUNTAIN/BOTTLES. SOLVENT INSOLUBLE BARRIER HAND CREAM.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
NOTE TO PHYS: ASPIRATED MEK MAY CAUSE SEVERE LUNG DAMAGE & PRESENT A
SIGNIFICANT HAZARD. STOMACH CONTENTS SHOULD BE EVACUATED QUICKLY IN
A MANNER WHICH AVOIDS ASPIRATION. THERE IS NO SPECIFIC ANTIDOTE .
PREC: SOLVENT VAPOR MUCH HEAVIER THANAIR & CAN COLLECT IN DANGEROUS
CONCENTRATIONS IN FLOOR DRAINS/LOW AREAS.
Chemical Properties
Boiling Pt:B.P. Text:176F
Vapor Pres:74.9 (MEK)
Vapor Density:>1
Spec Gravity:0.8
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:0
Appearance and Odor:LOW VISCOSITY BLUE LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZATION AGENTS
Stability Condition to Avoid:SOURCES OF IGNITION & HEAT.
Hazardous Decomposition Products:NITROUS OXIDE, PHENOLS, CO2, HYDROGEN
CYANIDE, CO.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. SOLID INGREDIENTS NOT CONSIDERED HAZARDOUS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.